镀金,让它闪亮!
贝碧欧镀金颜料,含有各种金属色,让效果更贴近您所想要的!
(注:该系列产品尚未在中国上市,如您感兴趣,请和我们联系 info@pebeo.com.cn)
- > La fiche technique (pdf)
Gilding waxes
5 colours in 30ml jar, made of very fine metal particles, coated with a binder of wax and acrylic resin. The combination of the patina bases and gilding waxes creates a rich range of classical or contemporary patinas. Suitable for all types of surfaces: wood, plaster, cardboard, glass, metal, etc.
Gilding Liquids
Metal powder suspended in a transparent varnish. Fine and precious, brushed on gilding gives a refined touch to your decorative objects.
page-breakPatina bases
The bases are used as undercoat in combination with the gilding waxes. They block the pores, isolate the surface and improve the adherence of the gild. By polishing the wax, you can create patinas.
Gilding Leaves
Gédéo gilding leaves are made of copper or aluminum for a gold or silver finish. They are easily applied using a glue called gilding paste.
page-breakGilding Paste
Ready-to-use preparation to glue on the gilding leaves. Suitable for use on, all clean and dry surfaces.
Verdigris Patina System
With the Verdigris Patina system it is very easy to reproduce the beautiful bronze or copper oxidation effects. This system consists of a bronze undercoat and a verdigris oxidant. It is suitable on all types of surfaces.
page-breakGilding Wax and Liquid Thinner
It is suitable for thinning the gilding waxes and making them more creamy. It is also used to clean the waxes and liquids from the tools.
Finish Varnish Gloss/Matt
The matt and gloss varnishes are based with a very resistant and transparent acrylic resin. They protect the decorations while preserving the brightness and intensity of the colours.
page-breakAgeing Patina
Especially recommended to provide a finish to gilding leaves, ageing patina can reproduce the warm tone and deep patina effect produced through time.
Verdigris Patina Fixative
Solvent-based varnish, protects and fixes the verdigris patina.
Gilding Leaves
Recommended especially for finishing. Apply Gédéo’s gilding paste using a brush on the clean and dry object (wood, plaster, glass, metal, cardboard ...). Let stand for 15 minutes.
Then put the gilding leaf on the object and brush it gently with a very soft brush. According to shape of the surface, work with leaf pieces.
Then polish with a cotton cloth. If spots are left on the object, repeat the process over.
Protect the work of the oxidation with a varnish.
Apply by brushing on, the ageing patina on the gilded object. Immediately wipe off the reliefs to show the brilliance of the gilding leaves, the ageing patina can reproduce the warm tone and deep patina effect of time.
Verdigris Patina System
After shaking the bottle, apply the Bronze Undercoat on the surface of your choice: plaster, clay, wood, metal, glass, cardboard . . .
After complete drying, apply without excess a layer of oxidant. The Verdigris Patina appears gradually after 10 minutes and runs for several hours.
To retain the effect, spray Gédéo fixative after drying.






